InsperaScan is Inspera's software for scanning of sketches after the test is finished. The software makes it easy to scan sketches in both colour and black and white, preview the scanned pages and register scantron codes retroactively.
Available for planner. This is a premium feature, please contact Service Desk to get quotes and to order. Prices can be found in our Service Catalogue.
This article contains following:
1 Installation of InsperaScan 2.0
1.1 Install the software
Download the software through the URL which you have received from Inspera. If you have not received the URL, contact Service Desk or your Inspera contact.
Unzip the file. The zip-file contains three folders and files:
- redist (folder)
Step 1 - Install the InsperaScan driver
- Open the "setup" program in the folder. Press "Yes" on the following message:
- Follow the instructions on the screen, and install the driver.
Step 2 - Open the program and enter customer details
- Return to the folder that you unzipped. Run the "setup" file again.
- Press "Next" on the window that pops up.
- Add customer information and serial number, and follow the instructions. If you haven't received the serial number, contact Service Desk or your Inspera contact.
- When the installation is complete, you can open InsperaScan.
1.2 Minimum Requirements
Pentium® processor: 1 GHz 32-bit (x86) or 64-bit (x64) minimum
System memory: 1 GB minimum
Hard drive space: 40 GB hard drive with at least 15 GB of available space
Monitor at 1024 x 768 or higher resolution
USB 3.0 connection
Windows 10 (32-bit or 64-bit)
1.3 First view (2.0)
The first time you open InsperaScan, you should see a screen similar to the one shown below. It is mainly blank because you have not selected any parameters or options yet.
2 Set up of InsperaScan 2.0
2.1 Installing the scanners driver
Each scanner model has its own driver and it must be installed on your computer prior to using InsperaScan. If you are using a scanner that has already been installed on your computer for use with other applications, you do not need to install it again.
InsperaScan can work with a variety of scanner models; however they must be tested before certifying compatibility.
Four available settings for the image quality in increasing order of disk space requirements for the files stored after processing:
- Monochrome (bitone): Converts image colours to either absolute black or absolute white based on their intensity level. It analyzes images at the pixel level. Every pixel below the "Monochrome Threshold" level will be considered black and every pixel above it will be considered white (see "Advanced settings").
- Greyscale: Converts colours to a 256 greyscale.
- Colour (24 bits): Stores the image as a 16 million colour image. Default setting.
- Scan continuously: The scanner will scan all forms in the input tray.
- Scan one document only: The scanner will scan one document and stop even if there are more forms in the input tray. This is useful for testing purposes.
Load images from a folder
This setting will load images from the folder specified in the corresponding text box. This allows the user to process images previously saved in this folder using other scanning software or network scanners.
Several scanners could be set to store images in a centralized folder that InsperaScan could later process through this option.
- Colour Images
- 200 dpi resolution
- .jpg, .tif, .tiff or .png file extensions Images are in the right direction, complete (not cropped) and straight.
When InsperaScan loads images directly from the scanner, it will make the scanner stop when an image
cannot be processed for any reason (upside down, incomplete, incorrect form, etc.) so that the user can
correct the problem and scan it again. However, when it is loading the images from a folder, it will attempt to process them and if any image cannot be processed for any reason, it will be moved to a subfolder called "Unprocessed".
The button "Unprocessed" will be enabled when loading images from a folder. Pressing it will open a new
window that will allow the user to review and manually rename those unprocessed files and save them in
the same export folder as the rest of the images but with the letters ‘Man’ as part of the file name to
distinguish them from the automatically named files.
When a scanner is installed, a user interface is installed along with it. This interface allows the user to
interact with the scanner for configuring and operating purposes.
InsperaScan will try to control the scanner automatically without using the scanner’s user interface. When
the ‘Scan’ button is pressed, the scanner is automatically set to capture images with the right configuration and an order to start scanning is sent to it. Most times the scanner will respond to these commands and the scanner will start scanning.
On rare occasions, some scanner models might not respond to InsperaScan’s commands and you may need to activate the scanner’s own user interface window in order to manually configure it and start scanning. On these occasions you can optionally set the scanner control to ‘manual’.
- Monochrome Threshold: This setting is only used when the ‘Image Quality’ setting ‘Monochrome’ is selected. The default value is 140 in a range from 0 to 255 where 0 is absolute black and 255 is
absolute white. Change this setting only if you are not getting images as expected (too light or too
dark). Press the ‘Default’ button to return its value to its default value.
- OMR Threshold: This setting is used when evaluating the OMR areas to determine the presence of
a mark. The default value is 180 in a range from 0 to 255 where 0 is the highest intensity and 255 is
the lowest. Any strokes inside the OMR area with an intensity value above (lighter than) the OMR
Threshold value will be ignored. Any strokes inside the OMR area with an intensity value below
(darker than) the OMR Threshold value will be considered, and when the area covered by these
strokes is significantly larger than other OMR areas in the same grid, a valid mark is acknowledged.